Overloud Gem Comp76 FET Compressor and Limiter Plug-In User Manual
Page 37
OVERLOUD GEMS
COMP LA
Here is how both units look when they are set to MID-SIDE mode.
HARMONICS
- Adjusts the amount of added harmonics. It ranges from
LINEAR
, which means no
harmonics at all, to
DIST
, which is the maximum level allowable. In the middle position there is
the
ORIGINAL
gear level.
LF SENS
- Adjusts the frequency of a High Pass Filter controlled by the audio program of the input
signal. The
fi
lter can reduce the pumping e
ff
ect when the audio program has a strong low fre-
quency beating component. When set all the way counterclockwise, the
fi
lter is turned o
ff
.
PARALLEL
- Balances between the DRY (unprocessed) and WET (processed) signals.
OUTPUT
- Adjusts the Output level to compensate the possible level changes introduced by the
compression. It ranges from -15 dB to +15 dB.
35