EchoStar 21.0 - Manual

C-4
Quick Setup
Press
POWER.
Press
POUND.
The TV Mode
button will
flash three times.
Program the Remote to
Control Your TV
1
2
3
4
5
6
To program the remote control to operate a
TV, you can enter an Equipment Code (see
instructions on page 3).
Or, follow the steps below to scan the
database of all Equipment Codes.
Or teach your remote the commands for
your TV (see instructions on page 9).
Press the UP ARROW on the
remote repeatedly (1 press per
second) until your TV turns off.
Press the POWER button
to turn the TV on and
try other buttons to make
sure the code works. If you
want to try another code,
start over from step
1
.
Press & hold the
TV Mode button until all
Mode buttons light up.
Turn your TV on.