Epson 7700p - Manual (Page 77)

Solving Problems 71
3. Drag one monitor icon on top of the other. This lets you
display on the projector screen as well as the LCD screen.
4. If this option isn’t available, click the Monitor icon.
5. Select one of the listed Simulscan resolutions. (Allow a few
seconds for the projector to sync up after making the
selection.)
The message Not Supported is displayed.
Make sure your computer’s resolution doesn’t exceed UXGA
(1,600
× 1,200), and the frequency is supported by the projector
(see page 99). If necessary, change your computer’s resolution setting
as described below.
Only part of the computer image is displayed.
■ Press the Resize button on the control panel or remote control.
■ Make sure the image Position setting is correct on the Video
menu. See page 44 for more information.
■ If the right or left side of the image is cut off, you may need to
adjust the tracking using the buttons on the control panel. Hold
down the + or –
Tracking button to change the setting until the
image looks correct.
■ Make sure your computer’s resolution setting is correct. Ideally, it
should be 1024
× 768 to match the projector’s native resolution.
If this option isn’t available, select one of the other compatible
video formats listed on page 99.
■ Windows:
Right-click the desktop, select
Properties , click the Settings
tab, and use the dialog box to select a different resolution.
■ Macintosh:
On the Apple menu, choose
Control Panels , then click
Monitors and Sound . Select a different resolution.
■ You also may need to modify existing presentation files if you
created them for a different resolution. See your software
documentation for specific information.
7700.book Page 71 Wednesday, November 1, 2000 6:15 PM