LG 27 Inch Electric Smart Dryer Owner Manual - Manual (Page 37)

37 OPERATION
Control Panel
1 2 3 5 6 4
8 4 7
NOTE
Model numbers can be found on the cabinet inside the door.
1 POWER Button
Press to turn the dryer ON. Press again to turn the
dryer OFF.
NOTE
Pressing the POWER button during a cycle will
cancel that cycle and any load settings will be
lost.
2 Cycle Selector Knob
Turn this knob to select the desired cycle. Once
the desired cycle has been selected, the standard
presets are shown in the display. On Manual Dry
cycles, these settings can be adjusted using the cycle
modifier buttons any time before starting the cycle.
3 START/PAUSE Button
Press this button to start the selected cycle. If the
dryer is running, use this button to pause the cycle
without losing the current settings.
NOTE
If you do not press the START/PAUSE button to
resume a cycle within 60 minutes, the dryer turns
off automatically.
4 Cycle option Buttons
The option buttons allow you to select additional cycle
options. Certain buttons also allow you to activate
special functions by pressing and holding the button
for 3 seconds.
5 Time and Status Display
The display shows the settings, estimated time
remaining, options, and status messages for your
dryer.
6 MORE TIME/LESS TIME Buttons
Use these buttons with the Time Dry and other
MANUAL DRY cycles to adjust the drying time.
Press the
More Time button to increase the selected
manual cycle time by 5 minutes; press the Less Time
button to decrease the cycle time by 5 minutes.
7 Cycle Modifier Buttons
Use these buttons to select the desired cycle settings
for the selected cycle. The current settings are shown
in the display. Press the button for that option to
select other settings.
8 Steam Functions
LG’s steam technology allows you to inject fabrics
with a swirling jet of steam to refresh clothes, reduce
static, and make ironing easier. Simply select the
Steam Fresh™ cycle or Steam Sanitary ™ cycle or
you can add a Steam option to selected cycles.