Bertazzoni Professional Series 24 Inch Freestanding Gas Range Owner's Manual - Manual (Page 15)

15
/ Gas oven
TELESCOPIC GLIDES (optional)
The telescopic glides fi t any shelf level and work
with the wire shelves provided as standard equi-
pment.
Fitting the glides
1 - Locate the two spring clips at the front
and back of the glides.
2 - Locate the pin on the glide that indicates
the back.
3 - Choose the right level and position the
telescopic glide near the upper wire.
4 - Gently insert the front spring clip on the
glide.
5 - Insert the rear spring clip on the glide.
6 - Pull and push each glide to ensure the
correct installation and smooth operation.
7 - Extract both glides to the fully extended
position and place the shelf over them,
making sure it’s accurately placed betwe
en the rear pin and the front pin.
Removing the glides
1 - Locate the two spring clips at the front and
back of the glide.
2 - Gently pull down the front spring clip.
3 - Pull the glide away from the oven side - be
careful not to strain the clip.
4 - Repeat steps 2 - 3 on rear spring clip to remo-
ve glide.
1
2
3
4