HP PhotoSmart 620 - Manual (Page 49)

6-Troubleshooting and support 47
My image is My image is My image is My image is
too dark.
too dark. too dark. too dark.
There was not
enough light. Before taking the picture, press
the
Shutter Shutter Shutter Shutter button halfway down
to adjust focus and exposure
automatically. Use the
Flash Off Flash Off Flash Off Flash Off
setting and hold the camera
steady. Wait for natural lighting
conditions to improve or add
indirect lighting.
The shutter
speed was too
fast. Use the Flash Off Flash Off Flash Off Flash Off setting to take
a longer exposure, and hold the
camera steady (or use a tripod).
The flash was
on, but the
subject was
too far away. Make sure your subject is within
3 meters (approximately 10 feet)
of the camera when you take the
picture using the flash.
A light shone
behind the
subject. Use the Flash On Flash On Flash On Flash On setting to
brighten the subject when there
is a bright light such as the sun
or a window behind your
subject.
Your finger
blocked the
flash. Be sure to move your fingers
away from the flash when you
take a picture.
Problem Possible cause Solution