HP 630 series User Manual
Page 68
68
hp photosmart 630 series user’s manual
NOTE
If your computer is running Windows XP, when you
turn on the camera in the next step, a dialog box may
display that requests you to
Select the program to
launch for this action
. Simply click on
Cancel
to close
this dialog box.
4
Turn on the camera. The HP Image Unload software will
launch on your computer. If you have set the software to
automatically unload the images in the camera, the images
will automatically unload to the computer. Otherwise, in the
Welcome
screen, click
Start Unload
.
Also, if there were any images in the camera that were
tagged in the
Share
menu for
HP Instant Share
destinations
Chapter 4: Using hp instant share
on page 58), those
images will be sent to their respective destinations after the
images have been unloaded to the computer.
5
When the unload screen on the computer says
Finished
,
your images have been saved and shared. You can now
disconnect the camera from the computer.
NOTE
To unload images to a computer that does not have the
HP Photo & Imaging software installed on it, change the
USB Configuration
setting to
Disk Drive
in the
Setup
menu.
Chapter 6: Using the setup menu
on page 71, and
then see
on page 73.) The
Disk Drive
setting allows the computer to recognize the camera as
another disk drive on the computer so that you can easily
copy the image files from the camera to the hard drive of
your computer.
However, if you want to use the
Disk Drive
setting on
your camera to unload images to a computer that is
running Windows 98, you must first install the HP Photo &
Imaging software on the computer.