HP 2250 - Manual (Page 39)

6-1
LCD messages
The most convenient way to change settings on the printer is from your
computer through the printer driver.
You can also change the printer settings from the printer’s Control Panel.
The following tables list the menu items and possible values for the
printer. Additional menu items can appear in the Control Panel,
depending on the hardware modules installed in the printer.
To print a complete menu map from the Control Panel:
1. Press the Menu button until INFORMATION MENU appears.
2. Press the Item button until PRINT MENU MAP appears.
3. Press the Resume button to print the menu map.
Information Menu
Message Value Description
PRINT DEMO N.A. Prints a sample page.
PRINT MENU MAP N.A. Prints a single page map of the menu
structure of the printer.
PRINT
CONFIGURATION N.A. Prints a single reference page describing
current configuration settings (firmware
version, model, accessories installed, fonts
installed, I/O support, cartridge and
printhead information).
PRINT PCL FONT
LIST (PS/PCL5 only)
N.A. Prints the number with corresponding
PCL5 fonts.
PRINT PS FONT
LIST (PS/PCL5 only)
N.A. Prints the number with corresponding PS
fonts (only available if postscript card is
present).
PRINT
DIAGNOSTIC
PAGE
N.A. Prints a page that contains information for
basic troubleshooting.
PRINT
DIAGNOSTIC+
PAGE
N.A. Prints a page that contains information for
advanced troubleshooting.
SHOW PRINTHEAD
HEALTH
N.A. Displays the health of the printhead on the
LCD.
TEST PAPER PATH1 1-10,
20, 30,
40, 50
Tests the Tray 1 paper feed mechanism
TEST PAPER PATH2 1-10,
20, 30,
40, 50
Tests the Tray 2 paper feed mechanism.
LCD