Honeywell SC1000 - Manual (Page 145)

SC Series Instruction Manual page 145
Mathe
m
ati
cs V
irt
ual
C
hannel
16
16.3 Setup Procedure
If you are not familiar with operating the instrument in the SETUP menu mode,
see “SETUP Menu mode” on page 23. A listing of all menu item is given in “Setup
Menu Reference” on page 157.
Step 1: Examine the Supplemental Instructions.
Supplemental Instructions contain important information about what each
Mathematics Channel does and what Function Inputs and/or Limit Output
pins of the System connector are used.
Step 2: Wire to the pins on the System connector.
See “System Connector” on page 35. It is important to read the Supple-
mental Instructions to determine the wiring for your application.
Step 3: Verify operation.