Home Automation HOME AUTOMATION - Manual (Page 63)

Menu 1 - Programs for a particular control unit number
Menu 2 - All Security related programs
Menu 3 - Programs for a particular macro button
Menu 4 - Programs for All On/Off functions
Menu 5 - Programs for a particular Temperature zone
Menu # - Displays every program
Selecting the 1 (CTRL) or 5 (TEMP) key will prompt you to specify the desired unit or temperature zone. These can be specified
by entering the number, followed by the ' # ' key or by using the arrow keys to scroll through a list of items.
UNIT:
ENTER UNIT
↓
TEMPERATURE ZONE
ENTER TEMPERATURE ZONE
↓
Selecting the 3 (BTTN) key will prompt you to specify the desired button number. These can be specified by entering the
number, followed by the ' # ' key or by using the arrow keys to scroll through a list of items.
BUTTON:
ENTER BUTTON #=MENU
↓
Pressing the ' # ' key first will bring up a menu of event button types to select from:
BUTTON
TYPE
1=CTRL 2=SEC 3=ZONE
↓
4=ALL 5=ALARM 6=X-10
7=MISC
↑
If there are no programs for the specified item, the console will beep three times and will display:
*** NO PROGRAMS ***
Otherwise, a help screen is displayed:
Press # to delete or
edit displayed program.
↓
The first program is displayed once the down arrow is pressed. The top line displays the time or button/event that activates the
program and any condition that must be true for the program to activate. The bottom line shows the command to execute when
the program is activated.
10:00 PM MTWTFSS &AWAY
Living Rm Lt ON
6:00 AM 10/10 &NIGHT
PROGRAM DAY
WHEN
AWAY:
ALL OFF
When 2 conditions are part of a single program, the conditions are not displayed on the console. Instead, "&MULTI" is displayed
to let you know that this program line contains 2 conditions. To view or edit the program, you must use the PC Access Software.
WHEN ZONE 1 NR: &MULTI
FOYER LIGHT ON
Page 55