HONDA Outboard Motor BF2D - Manual (Page 56)

54
REMOVAL FROM STORAGE
STORAGE
CASE PROTECTOR
CORRECT
INCORRECT
BEFORE
OPERATION
Any other horizontal storage position
may cause damage or oil leakage.
Cover the outboard motor to keep out
dust. Do not use sheet plastic as a
dust cover. A nonporous cover will
trap moisture, promoting rust and
corrosion.
Check your outboard motor as
described in the
chapter of this manual.
If the cylinder was coated with oil
during storage preparation, the
engine may smoke briefly at startup.
This is normal.
If storing horizontally, be sure to fold
the tiller handle, and rest the
outboard motor on its case protectors.
04/03/11 15:45:56 31ZW6601_055