HP 760c - Manual (Page 65)

Maintaining the Projector 65
Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the
projector’s menus.
1. Press the Menu button on the remote control or on the
projector’s control panel. You see the main menu.
2. Use the pointer button on the remote control (or the arrow
buttons on the projector) to highlight Reset , then press Enter .
You see this screen:
3. Select Lamp Hours Reset and press Enter . You see this prompt:
4. Select Yes and press Enter .
5. When you’re finished, press Esc or Menu to exit.
Montreal User's Guide.book Page 65 Tuesday, April 19, 2005 11:27 AM