Honeywell HWM-910 Series User Manual

Page 5

Advertising

SETUP

• Remove the water tank by grasping the handle and

pulling straight up. Set aside (Fig. 1).

• Turn the Water Tank upside down so that the Fill Cap

is facing up; unscrew the Fill Cap by turning it
counter-clockwise and set aside.

• Fill the Water Tank with COOL tap water (Fig. 2). Distilled

water is not necessary as the water is purified by the
heating element.

DO NOT USE HOT WATER. Doing so

may damage the humidifier.

• Replace the fill cap by turning it clockwise .

DO NOT OVER TIGHTEN.

NOTE: WHEN CARRYING THE FILLED WATER TANK,
PLEASE USE THE HANDLE AND PLACE YOUR OTHER
HAND UNDER THE TANK FOR ADDITIONAL SUPPORT.

• Turn the Water Tank right side up. Position the tank into

the humidifier and push it into place (Fig. 3).

• Some water will flow into the Removable Tray when the

filled tank is properly in place.

• Once the filled tank has been positioned, do not attempt

to move the humidifier. If it has to be moved, unplug the
humidifier and remove the water tank first.

CAUTION: DO NOT POUR WATER INTO THE
GRILLE ON TOP OF THE HUMIDIFIER (Fig. 3).
DOING SO MAY DAMAGE THE HUMIDIFIER OR
CAUSE PERSONAL INJURY.

NOTE: We recommend that the humidifier be disinfected prior to first use. Please
see WEEKLY CLEANING instructions.

• Select a firm, level, flat location - at least six inches (15 cm) from any wall for

proper air flow (Fig. 1). Place the humidifier on a water-resistant surface, as
water can damage furniture and some flooring.

Honeywell will not accept responsibility for property damage caused by water
spillage.

Fig. 1

➡

Fig. 2

Fig. 3

ALL

FILLING

HU4078.01 HWM-910/910C OM 8/6/01 3:33 PM Page 4

Advertising