HP 3030 - Manual (Page 53)

Printing booklets
Note Printing booklets is not supported for Macintosh.
You can print booklets on letter, legal, or A4 print media.
To print booklets
1. Load the print media in the media input tray.
2. In the software program, open the device properties (printer driver). For instructions, see
To change settings for a print job (Windows) or To change settings for a print job
(Macintosh) .
3. On the Finishing tab (the Paper Type/Quality tab for some Macintosh drivers), select
Print on Both Sides.
Note If the Print on Both Sides option is dimmed or unavailable, open the device properties
(printer driver). For instructions, see
To change default settings across all programs
(Windows) or To change default settings across all programs (Macintosh) . On the Device
Settings tab or the Configure tab, select the option to allow manual duplexing, and then click
OK. Repeat steps 2 and 3.
Not all device features are available for all printer drivers or operating systems. See the device
properties (driver) online Help for information about the available features for the driver.
4. Set the number of pages per sheet to two. Select the appropriate binding option, and click
OK.
5. Print the booklet.
6. After side one has been printed, remove the remaining paper from the input tray, and set
it aside until your booklet job is complete.
ENWW Printing booklets 43