Honeywell HD-16DVR-C - Manual (Page 164)

FAQ
148
18. Alarm signal cannot been disarmed.
There are the following possibilities:
 Alarm setup is incorrect.
 Alarm output has been opened manually.
 Input device error or connection is incorrect.
 Some program versions may have this problem. Please upgrade
your system.
19. Alarm function is null.
There are following possibilities:
 Alarm setup is incorrect.
 Alarm cable connection is incorrect.
 Alarm input signal is incorrect.
 There are two loops connected to one alarm device.
20. Remote control does not work.
There are the following possibilities:
 Remote control address is incorrect.
 Distance is too far or control angle is too small.
 Remote control battery power is low.
 Remote control is damaged or DVR front panel is damaged.
21. Record storage period is insufficient.
There are the following possibilities:
 Camera quality is too low. Lens is dirty. Camera is installed against
the light. Camera aperture setup is incorrect.
 HDD capacity is not enough.
 HDD is damaged.