HP 4100 mfp User Manual
Page 81
Clearing jams 79
Clearing jams from the top cover and
toner cartridge area
1
Open the top cover and remove the toner cartridge.
CAUTION
To prevent damage to the toner cartridge, do not expose it to
light for more than a few minutes.
2
Use the green handle to lift the paper-access plate.
3
Slowly pull the media out of the product. Do not tear the
media.
Note
If media is difficult to remove, try clearing it from the input tray
area (see
“Clearing jams from input trays” on page 80
Avoid spilling loose toner. Using a dry, lint-free cloth, clean any
loose toner that might have fallen into the product.
If loose toner falls into the product, it might cause temporary
problems with print quality. Loose toner should clear from the
paper path after a few pages are printed.
If toner gets on your clothing, wipe it off with a dry cloth and
wash the clothing in cold water. (Hot water sets toner into
fabric.)
4
Open Tray 1 and remove the entrance cover to check for
any additional jammed media. If any is present, remove it.
5
Rotate the paper guide to check for additional jammed
media. If any is present, remove it.
Continued on the next page.
2
3
1
4
5