Honeywell VRX180 User Manual
Page 39
Advertising
Installation
Video Recorder - User Manual
25
Figure 2-5 DO Board Terminal Block Connections
The Digital Output board with relay outputs contain jumpers to set the de-energized state of the relay
contacts. The relays are factory set to Normally Closed (NC) for each output on the relay output board,
To change the state of the contacts: See
Figure 2-6 DO Board Relay Contact Setting
. Use a pair
of needle-nose pliers and move the jumper from the location NC (normally closed ) to the location NO
(normally open).
Advertising