HP A9834-9001B - Manual (Page 217)

Appendix C
Powering the System On and Off
Shutting Down the System
217
Step 8. From the VFP, enter s to select the whole system or enter the partition number to select a
particular partition. You should see an output similar to that shown in Figure C-6.
Figure C-6 Example of Partition State
Step 9. Enter ctrl+B to exit the Virtual Front Panel and bring up the Main Menu.
Shutting Down the Operating System
You must shutdown the operating system on each partition. From the Main Menu prompt, enter co to bring
up the Partition Consoles Menu (Figure C-7).
Figure C-7 Partition Consoles Menu
For each partition, perform the following steps:
Step 1. Enter the partition number at the prompt.
Step 2. Log in to the console:
• HP-UX: Log in as root
• Linux: Log in as root