Hoya H01-201106 - Manual (Page 182)

180
E
d
itin
g Im
ag
es
7
Developing RAW Images
You can convert captured RAW images into JPEG images, and save them
as a new file.
1
Select a RAW image in Playback mode, and press the four-
way controller (3).
The playback mode palette appears.
2
Use the four-way controller (2345) to select h (RAW
Development), and press the 4 button.
The screen to select a development method is displayed.
3
Use the four-way controller (23)
to select [Developing a Single
Image], and press the 4 button.
The parameters recorded in the image file
appear.
Proceed to Step 7 if you do not need to
change the parameters.
4
Use the four-way controller (23)
to choose a parameter you want
to change.
You can select a different image by
turning the e-dial.
Only RAW images captured with this camera can be edited. RAW images and
JPEG images captured with other cameras cannot be edited on this camera.
Developing One RAW Image
Developing Multiple Images Developing Multiple Images
Developing a Single Image Developing a Single Image
MENU OK OK OK
Image Capture Settings Image Capture Settings
OK MENU
100-0001 100-0001