750c plus, Task 10: print a test plot – HP 700 User Manual
Page 59
![background image](/manuals/93696/59/background.png)
750C Plus
1-39
Company confidential. Murillo/Ravillo User’s Guide. Final Freeze Status: Frozen
This is the cyan on page 1-39 (seq: 57)
This is the black on page 1-39 (seq: 57)
Task 10: Print a Test Plot
The sample plots explained in task 6 simply verify the operation of the plotter
itself. Having connected the plotter to your computer and configured the drivers or
other software for your requirements, you should now be in a position to send a
test plot using one of your own files.
Among the points you should be looking out for are:
Did the
Receiving
light on the front panel come on?
Do you see any error message on the front-panel display?
Does the image appear in the size, orientation and position on the sheet that you
expected?
Is any of the image clipped?
Are the lines of the correct width?
Are the colors an exact representation of what you expected?
If you find any problem at all, start by consulting chapter 9 of this manual,
“Troubleshooting.” There you will find advice on many different types of
problems, from obtaining no plot at all, to tracking down the reason for a specific
print-quality issue. In case you do not solve your problem with the information
supplied there, chapter 9 also contains advice on where else to turn for help.
SETUP
1
Setting Up the Plotter
Task 10: Print a Test Plot