HP 110 - Manual (Page 71)

Display assembly components
NOTE: These procedures are for replacing the display assembly internal components for HP Mini
110 and Compaq Mini CQ10 models.
Description Spare part number
Display assembly hinges and covers 658506-001
Display bezel for HP Mini 110 models 658503-001
Display bezel for Compaq Mini CQ10 models 658504-001
Webcam module 658516-001
Display panel 658511-001
Display/webcam cable 658505-001
Antenna cables 658498-001
Display enclosure, Glossy Black for use with HP Mini 110 models 658499-001
Display enclosure, Glossy Black for use with Compaq Mini CQ10 models 658518-001
Display enclosure, Pacific Blue for use with HP Mini 110 models 658502-001
Display enclosure, Sonoma Red for use with HP Mini 110 models 658500-001
Before removing the display assembly components, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 44 ).
5. Remove the service door (see Service door on page 45 ).
6. Disconnect the WLAN antenna cables from the WLAN module (see WLAN module on page 46 ).
7. Disconnect the WWAN antenna cables from the WWAN module (see WWAN module
on page 47 ).
8. Remove the keyboard (see Keyboard on page 53 ).
9. Remove the top cover (see Top cover on page 56 ).
10. Remove the display assembly (see Display assembly on page 61 ).
Component replacement procedures 63