HP 445946-001 - Manual (Page 67)

VLANs
67
FDB static entries are permanent, so the FDB Aging value does not apply to them. Static entries are
manually added to the FDB, and manually deleted from the FDB.
Incoming frames that contain the static entry as the source MAC can use only ports configured for the
static entry.
Trunking support for FDB static entries
A FDB static entry can be added to a port that is a member of a trunk group, as follows:
• Static (manually configured) trunk group
• Dynamic (LACP) trunk group
The trunk group supports the FDB static entry. If the port with the static entry fails, other ports in the trunk
handle the traffic. If the port is removed from the trunk, the static entry is removed from the trunk, but
remains configured on the port.
The FDB information commands (
/info/l2/fdb
) display trunk support for static FDB entries, if
applicable:
>> Forwarding Database# dump
MAC address VLAN Port Trnk State
----------------- ---- ---- ---- -----
00:00:2e:9b:db:f8 1 1 TRK
00:00:5e:00:01:f4 1 21 FWD
00:01:81:2e:b5:60 1 21 FWD
00:02:a5:e9:76:30 1 1 TRK
00:03:4b:e2:15:f1 1 21 FWD
Configuring a static FDB entry
Perform the following actions to configure a static FDB entry:
Main# /cfg/l2/fdb/static (Select static FDB menu)
>> Static FDB# add 00:60:af:00:02:30
Enter VLAN number: 2
Enter port (1-21): 2
>> Static FDB# apply (Apply the configuration)
>> Static FDB# save (Save the configuration)