Safety non contact switch ff-snc, Dimensions (mm/in) – Honeywell FF-SNC User Manual
Page 2
2
Safety Products for Machine Safeguarding -
© 2002 - 2004 Honeywell International Inc. All rights reserved.
W
22,5 / 0.88
75 / 2.95
H
84 / 3.30
74 / 2.91
D
119 / 4.68
119 / 4.68
FF-SNC200R2
FF-SNC1EXTFF-SNC400R2
FF-SNC400RE
(mm/in)
W
H
D
H
A1
DR
BL
DR
BL
DR
BL
A2
DR
BL
DR
BL BL
DR
GATE 4 GATE 5
GATE 3
GATE 1 GATE 2
Safety Non Contact Switch FF-SNC
• Complies with the requirements of the EN 954-1 for Category 3
equipment
• Meets applicable parts of ANSI/RIA/OSHA regulations
Dimensions in millimeters / inches, meters / feet, weights in kg / lbs
Features
Switch
Material
Sensing range
Minimum gap
Standard cable length
Temperature
Connection to the control unit
Sealing
Fixing
Control unit / extension module
Category
Supply voltage
Response time of the control unit
Power consumption (including sensors)
Temperature
Output
Output Contact Rating
Restart
Sealing
Mounting
LED indicators
Material
ABS (FF-SNC1SA❏❏
❏❏
❏❏
❏❏
❏❏PA-❏
❏
❏
❏
❏) or Stainless Steel 316 and Resin filled (FF-SNC1SA❏❏
❏❏
❏❏
❏❏
❏❏PS)
5 mm - 7 mm / 0.20 in - 0.27 in ON • 8 mm - 12 mm / 0.32 in - 0.47 in OFF
allowable misalignment: ±4mm / ±1/6 in
1 mm
Prewired 3 m / 9.84 ft or 5 m/16.4 ft (ABS only) - M8 plug: 5 mm/16.4 ft (ABS only)
Operating: -10 °C to +55 °C/14 °F to 131 °F • Storage: -20 °C to +60 °C/-4 °F to 140 °F
Max. cable length: 100 m / 328 ft
IP 67 prewired or M8 plug
2 x (M4 x 20 mm) Tamper proof screws (supplied with the product)
Category 3 according to EN 954-1
24 Vdc/Vac ±15 % • 110 Vac ±15 % (FF-SNC400RE only)
15 ms (with or without extension module)
6 VA (with or without ext. module): FF-SNC400 • 3 VA (with or without ext. module) : FF-SNC200
Operating : -10 °C to + 55 °C / 14 °F to 131 °F • Storage: -20 °C to 60 °C / -4 °F to 140 °F
2 NO + 1 NC relay contact
Max.: 4 A / 230 Vac; 2 A / 24 Vdc (Res.) @Cos = 1 • Min.: 10 V / 10 mA
Manual or automatic
IP 40 Housing, Terminals IP 20
35 mm / 1.37 in DIN rail
FF-SNC200R2 control unit: Power, Run and 2 guard status indicators
FF-SNC400RE control unit: 4 guard status indicators and deselect indicators
Polycarbonate, red
UL
C
US
STED
LI
®
CATEGORY 3
per EN 954-1
Suitable for interfaces
up to
■
■
■
■
■
Dimensions (mm/in)
Prewired
M8 plug
M4 x 20 mmTorx screws are supplied with the switches.
SIDE
3 / 0.11
ш 8,1 / 0.32
ш 4,2 / 0.16
6,4 / 0.25
22 / 0.86
SIDE
22 / 0.86
3 / 0.11
ø 8,1 / 0.32
6 / 0.23
a / 2
a / 2
ø 4,2 / 0.16
6,4 / 0.25
b
a
c
b
a
c
ABS
SS316
52 / 2.04
a
b
c
53 / 2.8
28 / 1.10
29 / 1.14
14 / 0.55
13.5 / 0.53