Check belt routing path, Check belt guards & gap – HONDA SB 2040 User Manual
Page 19
Advertising
SB2040 Snowblower
Check Belt Routing Path
1.
Move the PTO clutch lever to ON. Verify the belt has been routed
as shown.
RIGHT SIDE
ENGINE CRANKSHAFT PULLEY
TWIST IN BELT ON
RIGHT SIDE PULLE
Check Belt Guards and Gap
Inspect the four belt guards on the
PTO
clutch assembly. Verify each guard is
positiioned as shown.
Check the spacing between the the two
pulleys and the four belt guards. Verify
there is a gap
of 1/8 - 3/16"
(3
-5
mm).
FIXED (LEFT SIDE) PULLEY
\\--
REAR VIEW
20
-
23 ft-lb.
(27
-
31
MOVEABLE (RIGHT SIDE) PULLEY
18
POP
52152 (9610)
Advertising
This manual is related to the following products: