Removing the battery pack – Honeywell DOLPHIN 6000-QS User Manual

Page 7

Advertising
background image

Note: Install the battery door before powering the terminal.
5. Connect the terminal to one of the Dolphin 6000 charging

peripherals to charge the battery pack.

Removing the Battery Pack

Perform the following steps to remove the battery.

1. Slide the latch to unlock the battery door.

2. Open the battery door.

3. Remove the battery by lifting the tab on the battery.

We recommend use of Honeywell Li-Ion battery packs. Use of any
non-Honeywell battery may result in damage not covered by the
warranty.

!

Advertising