Hitachi ULTRAVISION L32S504 - Manual (Page 30)

30
Select Video to adjust picture settings and improve picture quality.
You can independently customize each of the video inputs,
including Analog channels separately from Digital Channels (under
TV Mode). Adjustments will be applied to Custom settings.
Picture Mode
Use this function to choose from preset picture settings to optimize
your TV’s performance.
1. Use the CURSOR PAD to select Picture Mode settings
(Dynamic, Standard, Movie, Custom, Game or PRO modes).
2. Then press the button to return to the Video menu or press
EXIT to quit menu.
3. There are seven Picture Modes available: Dynamic,
Standard, Movie, Custom, Game, Pro-Day, and Pro-Night
Mode. Standard is the factory preset mode for your TV. The
only mode that can be directly changed by adjusting any Video
setting to your desired conditions is the Custom mode. The
other modes, with the exception of the Pro-Day and Pro-Night
(refer to Calibration Menu on page 30 for adjusting these
modes), are preset. Any changes made to these modes will
be applied to Custom mode.
NOTES • For the PC input, there are only two Picture modes
available: Standard and Custom. In this case, only
Custom can be changed to your desired conditions.
• Video Setting can be set to the user’s preference
in Game mode (Similar to Custom mode) with the
exception of the Auto Movie setting.
• If you change any of the adjustments in the Dynamic,
Standard and Movie modes, the name of the
Custom option will change. For example, changes
on Dynamic will rename the option as “Custom-
Dyn.”. This means that the original picture mode is
not affected by the changes; the only thing affected
is that Custom mode will take the video adjustments
of the mode where the change was made.
Pro Mode
This Hitachi LCD TV includes a picture quality mode called “PRO
Mode” designed to customize the picture settings and is protected
by a password in order to keep your settings as you want it. This
option will give a couple extra picture modes (Pro-Day and Pro-
Night) on your LCD TV for your viewing pleasure.
Please follow the next steps in order to adjust these special modes
on your LCD TV.
1. Using the remote control, press the MENU button and select
the Video menu by pressing the SELECT or ► button.
2. Use the CURSOR PAD ▼ to highlight the Picture Mode option,
then press and hold the P.MODE button for 3 seconds, the
Access Screen should appear.
3. The code to enter the Pro Mode feature is a four digit access
code. The factory preset code is 0000. Use the NUMBER
buttons on the remote control to enter the access code. After
entering the correct access code, the Calibration Menu (green
OSD) should appear and the picture mode changes to PRO
Mode.
The password used to access the Pro Mode feature
is the same password that is used to set and activate
parental controls. To change this password please
refer to the “Set the Password” Function on page 34.
Calibration
Menu
Input Mode
Please Enter Access Code
Access Code
Pro-Day
45
65
R1
56
53
Contrast
Contrast
Brightness
Color
Tint
Sharpness
Move Select SEL Return Exit EXIT
TV
4. While in the Calibration menu, use the CURSOR PAD ▲, ▼ to
highlight the desired function to be adjusted.
5. Press the SELECT button or the CURSOR PAD ► to select
the function settings.
6. Press the CURSOR PAD ◄ or ► to adjust the function.
7. Press MENU to return to the Main menu or EXIT to quit the
Calibration menu.
Calibration Menu:
White Balance: Use this function to adjust the dark end (Cutoff)
and bright end (drive) of the White background.
For Input Mode, CABLE and AIR share the same
Video adjustment settings. Also, each of the video
inputs have their own independent video adjust-
ment settings.
Video
Audio
Setup
Channels
Multimedia
Picture Mode Standard
Medium
45
65
0
56
53 Contrast
Brightness
Color
Tint
Sharpness
Color Temp.
Move Select SEL Return Exit EXIT
Video
Audio
Setup
Channels
Multimedia
Picture Mode Standard
Medium
45
65
0
56
53 Contrast
Brightness
Color
Tint
Sharpness
Color Temp.
Move Select SEL Return Exit EXIT
Video
Video
Audio
Setup
Channels
Multimedia
Picture Mode Standard
Medium
45
65
0
56
53 Contrast
Brightness
Color
Tint
Sharpness
Color Temp.
Move Select SEL Return Exit EXIT
Video
Audio
Setup
Channels
Multimedia
Picture Mode Standard
Medium
45
65
0
56
53 Contrast
Brightness
Color
Tint
Sharpness
Color Temp.
Move Select SEL Return Exit EXIT
NOTE
NOTE