HP 1175C - Manual (Page 41)

HP OfficeJet Pro User’s Guide 3-5
To change the Copy Quality setting, press the Copy Quality button,
the small button directly beneath the three quality settings (Best,
Normal, Fast), until the light next to the copy quality setting you want
to use is lit.
Reduce/Enlarge Options
Using the HP OfficeJet Pro’s digital Reduce/Enlarge features, you
can quickly and easily reduce or enlarge images to the size you want.
NOTE Some Reduce/Enlarge features let you specify the exact percent reduction
or enlargement you want to use. The Minus/Plus (
– + ) signs next to the
feature name let you know whether this option is available. Press the
Minus (
– ) or Plus ( + ) button once to change the percentage by 1. Hold down
the Minus ( – ) or Plus ( + ) button to change the percentage in increments o f 5.
◆ Normal 100% makes a copy that is the same size as your original.
◆ Entire 91% reduces your copy to ensure that all the edges are
copied.
◆ Auto Fit pre-scans the original to determine where its edges are.
Auto Fit then reduces or enlarges the original to fit on the paper
you are copying onto.
When enlarging, Auto Fit increases the size of the copy to the
largest size that will fit on the page without distorting the image,
and centers the image on the page.
NOTE Use Auto Fit or Entire 91% to slightly reduce your original and ensure that
you copy the entire page. Entire 91% is a faster solution, because it uses a
fixed percentage to make the copy—no pre-scan is needed to calculate the
size of the original. Auto Fit is an easy solution—the Auto Fit feature
calculates the reduction percentage for you, and all your copies will be the
same size.
◆ Custom 100% ( – + ) lets you specify (using the plus or minus
buttons) the exact reduction or enlargement percentage to use.
You can specify any percentage between 25% and 400%.