HP VA 7400 - Manual (Page 41)

VA 7100/7400 Cluster Installation Guide
10/12/01 38
6 Cluster Setup
Introduction
This chapter provides detailed instructions for performing the cluster setup.
Preliminary Operations
The following preliminary operations must be successfully completed before beginning the Cluster Setup Procedure .
1. Ensure that all requirements detailed in chapters 2 through 5 have been thoroughly reviewed and successfully
completed.
2. Ensure that storage array is powered up and maintained in accordance with the procedure of chapter 3.
3. Ensure that node 1 is powered up and running.
4. Ensure that node 2 is powered up but in Pause mode. Refer to step 16 of the Configuration Procedure of
chapter 5.
5. Ensure that the cluster Configuration Worksheet located in Appendix A has been completely filled out.
6. On the node 1 Windows 2000 Configure Your Server window shown below, click Finish setup.