haier HLH32ATBB - Manual (Page 37)

Viewing Picture - in- Picture
Operation
PIP function
Press the PIP button on the remote controller, the screen show PIP POP and Main Picture window in turns .
Owner s Manual 37
PIP Position
Note:
1
When press the PIP button on the remote controller , the PIP show in the default position which is top left corner,
in pip mode the bigger window is called main window(MP) and another is called submain window(PIP) ;
in pop the right window is called main window(MP) and left window is called submain window(POP).
2 When press PIP button, focus on the MP, any operation is to MP.
3 If the PIP window is DTV signal, the operation of the CH+/- button is PIP window.
In PIP mode, press the POSITION button to select the position of the PIP window. As following.
- This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot
watch one TV channel in the main screen, and a different one in the PIP screen.
- The PIP function is be used only in DTV and VIDEO1 modes.
- If CC mode is NO, the CC display only in MP window.