HP 1100AHP - Manual (Page 115)

C4224-90962 Bottom assemblies 113
ECU pan removal
Figure 4-49 Removing the ECU pan
Prior to this step: Remove the scanner, pods, doors, back cover, front cover, formatter; and
disconnect the ECU cable.
NOTE: If the fuser cables are connected, disconnect them before removing the ECU pan.
1 Remove the two screws fastened to the brackets on the sides of the pan.
2 Remove the two screws accessed through openings in the side of the black plastic
printer chassis.
3 Disconnect the small solenoid connection from the back of the ECU.