Humax VA-FOX - Manual (Page 16)

To change services, do in the following sequence:
1. Press the NUMERIC buttons(0~9) on the remote control unit.
2. Press the buttons or buttons.
Or press the RECALL ( ), Service-list( OK ), EPG ( )mode
button. To switch between TV and Radio services, press the
TV/Radio ( )button. To select the previous viewed service,
press the RECALL ( )button.
To adjust the volume level, use the buttons or buttons.
To temporarily stop the volume, press the
MUTE ( )button.
To cancel mute, press the MUTE ( )button again or press the
buttons or buttons.
When you want to change the audio language of current service,
press the
GREEN ( )button firstly.
The on-screen menu is displayed on the top to left side of the screen.
To change the audio language:
1. buttons : Use to select the audio on the left, right or both.
2. buttons : Use to select the audio language you want.
3. OK , EXIT button : When this button is pressed, the Soundtrack OSD
will disappear keeping the selected Soundtrack
language constant.
When the current service is switched, the audio language returns
to the audio language that was selected in previous service. If the
returned audio language is invalid, the audio language that you select-
ed from the audio language menu has the priority of playback.
When the current broadcasting programme provides subtitle, press
the
SUBTITLE ( )button to see the current subtitle language list.
To change the subtitle language:
Use the buttons to select a Subtitle language you want.
Press the OK button and the selected language is highlighted and
then the Subtitle language you want is displayed on the screen.
Press the
EXIT button to cancel the Subtitle mode.
Changing Services
Volume Control
Soundtrack
Subtitle
GB14
English (HSMM30GB) 10/30/02 10:06 AM Page 17