HP N31.5 - Manual (Page 24)

24
1 1 4 3 2
CD Transport Assembly
1 FINGER WELLS
These cutouts make it easy to grasp a CD by its edges when placing it on
or removing it from the spindle. Both right-handed and left-handed users
are accommodated by having both diagonals available.
LEVELLING SCREWS
For the best performance, the Nº31.5’s transport assembly should be level.
Four levelling screws (one inside each finger well) allow you to adjust the
transport assembly easily.
With the supplied 3 ⁄
32
" hex driver, and using the Nº31.5’s bubble level (3) as
a gauge, adjust one or more of these screws to bring the transport assembly
to level. To lower a corner, turn the corresponding screw clockwise; to raise
a corner, turn the screw counterclockwise.
2 SPINDLE
This is the device that spins the CD, and on which the CD rests during play.
The CD must be centered on the spindle, and it must be clamped to the
spindle by the
disc damper .