Hotpoint MSZ - Manual (Page 11)

GB
11
Using the appliance
Alarms
In the event of an alarm, the acoustic alarm and
indicator lights are activated.
Important: To disable the acoustic signal, press the
Reset button above the alarm icon.
Door open alarm
The door alarm symbol lights up and the acoustic
alarm is activated when one or both doors of the
refrigerator and/or freezer have remained open.
When the doors are left open for more than 2 minutes,
the symbol flashes and an acoustic signal sounds.
Operation alarm
The activation of the acoustic alarm and the
appearance of a letter code on the display indicates a
problem with the appliance. If this happens, call
customer service. You will be asked to provide the letter
code shown on the display instead of the temperature.
Operation symbols
Water filter
This symbol indicates the state of the water filter.
The filter symbol is blue (green on some models) on
new products, or after the filter cartridge has been
replaced. When the icon becomes yellow, the filter life
is almost exhausted and the filter cartridge will need
replacing shortly.
When the icon becomes red, the filter will be replaced.
Important: Only replace the cartridge when the
symbol on the display becomes red. After replacing
the filter cartridge, press the
Filter Reset
button,
until the icon becomes blue (or green).
The
Filter Reset button will not work if the filter icon is
already blue (or green).
The water filter is located under the freezer
compartment door.
Optional functions
Control panel lock function
This function locks/unlocks the buttons on the control
panel and the ice and water dispenser in order to
prevent accidentally changing settings or switching off
the appliance.
The panel can be locked by pressing both the
Fast
freeze
button on the left of the panel and the
Vacation
button on the right of the panel at the
same time, for about 3 seconds: the symbol will
come on and an acoustic alarm will indicate activation
of the function.
To deactivate the function, carry out the same
procedure until the symbol goes off.
Super freeze
This function must be activated before freezing fresh
food. To activate the function, press the : button
until the
Super freeze symbol appears. The function is
automatically deactivated after 24 hours, or manually
by pressing again the button.
Holiday
This function deactivates the refrigerator compartment
if the user is going away for sometime.
This function can be activated or deactivated by
pressing the button. The relevant icon will come
on and the displayed temperature of the refrigerator
compartment will be replaced by a dash. To reactivate
the refrigerator compartment, repeat the operation.
After activating the function, remove perishable food
from the refrigerator compartment and keep the door
closed, since the refrigerator maintains an adequate
temperature for preventing the formation of odours..