Horizon Fitness Ti 10K - Manual (Page 5)

I M P O R T A N T P R E C A U T I O N S
SAVE THESE INSTRUCTIONS
Read all instructions before using this treadmill. When using an electrical product, basic precautions should always be
followed, including the following: Read all instructions before using this treadmill. It is the responsibility of the owner to
ensure that all users of this treadmill are adequately informed of all warnings and precautions. If you have any questions
after reading this manual, contact Horizon Fitness at the number listed on the back panel of this manual.
Connect this exercise product to a properly grounded outlet only. See grounding
instructions.
GROUNDING INSTRUCTIONS
This product must be grounded. If a treadmill should malfunction or breakdown, grounding provides a path of least
resistance for electrical current to reduce the risk of electrical shock. This product is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with local codes and ordinances.
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt as
to whether the product is properly grounded. Do not modify the plug provided with
the product. If it will not fit the outlet, have a proper outlet installed by a qualified
electrician.
This product is for use on a nominal 220-volt circuit, and has a grounding plug that looks like the plug illustrated
below. A temporary adapter such as the one illustrated below may be used to connect this plug to a 2-pole receptacle
as shown, if a properly grounded outlet is not available. The temporary adapter should be used only until a properly
grounded outlet can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from
the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the
adapter is used, it must be held in place by a metal screw.
3-Pole Grounded Outlet 2-Pole Outlet in Grounded Box
METAL GROUNDING SCREW
ADAPTER
GROUNDED
TREADMILL
POWER CORD
GROUNDED
TREADMILL
POWER CORD
LIMITED WARRANTY
INTRODUCTION
IMPORTANT PRECAUTIONS
KNOW
YOUR TREADMILL
BEFORE
YOU BEGIN
TREADMILL OPERATION
CONDITIONING GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
4