Digital keystone correction, Auto adjustment – HP Digital VP6121 User Manual
Page 17
Operation 17
User’s Guide
Digital Keystone Correction
Keystoning refers to the situation where the projected image is noticeably wider at
either the top or bottom. To correct this, press KEYSTONE
/
(hot key) on
the control panel of the projector or on the remote control, and then adjust the sliding
bar labeled Keystone, as needed. Press
if the top of the image is too wide. Press
if the bottom of the image is too wide.
Auto Adjustment
In some cases, you may need to optimize the picture quality. To do this, press the
AUTO key on the control panel of the projector or on the remote control. Within 3
seconds, the built-in Intelligent Auto Adjustment function will re-adjust settings to
provide the best picture quality.
keystone
menu
Projector
Remote control
Projector
Remote control