Honeywell HMLCD19 - Manual (Page 14)

Rev. A 4 HMMU000882
04/09/04
NOTES:
Rev. A 9 HMMU000882
04/09/04
2.6 DISPLAY MODES MEMORY
The microcontroller has memory capacity to store 27 different
display modes including timing formats and display settings.
This memory capacity is divided into two parts: user setting
area and factory presetting area.
User Setting Area
The user can add non-standard modes. If display image is
adjusted, the image is saved automatically, then when the
microcontroller is turned on it detects and displays the last
mode stored in the user setting area. The user setting area
maintains the last 10 display modes set by the user in its
memory. When the user setting area is full (6 modes are
registered), if new non-standard timing is registered, the oldest
timing settings will be deleted.
Factory Presetting Area
There are 17 display modes stored in the Factory Presetting
Area. The display modes are preset at the factory and include
most of the display modes currently available (see Timing Chart).
Factory Preset Mode can also be retrieved by selecting the
RECALL menu.
Automatic Save
The monitor automatically saves the setting value 20 seconds
after adjusting the OSD menu.