Memory options, Dimm installation guidelines – HP ProLiant DL385 User Manual

Page 62

Advertising
background image

62

HP ProLiant DL385 Server User Guide

14. Install the PPM.

NOTE: The appearance of compatible PPMs may vary.

15. Install the air baffle.

16. Install the access panel ("Installing the access panel" on page

39

).

17. Power up the server ("Powering up the server" on page

35

).

Memory options

You can expand server memory by installing PC-3200 Registered DDR SDRAM
DIMMs. The server supports up to 16 GB of memory using eight 2-GB DIMMs.

NOTE: The server is set to Advanced ECC Support. For more
information, refer to "HP ROM-Based Setup Utility (on page

105

)" or the

HP Rom-Based Setup Utility User Guide located on the Documentation
CD.

NOTE: PC2 memory, also known as DDR2 SDRAM, is not supported.

Refer to "DIMM Slots (on page

17

)" for DIMM slot locations and bank

assignments.

DIMM installation guidelines

You must observe the following guidelines when installing additional memory:

Advertising