HP 750 - Manual (Page 81)

1 Ensure that the encoder strip is oriented
with the transparent area down.
2 Feed the strip through the apertures in
the cartridgeĆcarriage assembly.
3 Use a washer and screw to attach the
encoder strip to the bracket on the left
side of the plotter.
4 Use a washer and screw to attach the
encoder strip to the bracket on the right
side of the plotter.
Tx 10
5,5 mm
Ensure that the metallic tensioner is
correctly positioned in the holder.
6-29 Removal and Replacement C4705-90000
Reinstalling the Encoder Strip