HP N6350 - Manual (Page 14)

5. Adjust the paper guides to the width of the documents. Take care not to overtighten
the guides, which can restrict paper feeding, but make sure that the paper guides
touch the edges of the documents.
6. Gently push the stack forward to activate the tray sensor.
See also
•
“Document loading tips” on page 9
• “Automatic document feeder (ADF) problems” on page 46
• “Start a scan” on page 15
Use the scanner glass
Place items that do not meet the specifications for the automatic document feeder (ADF)
directly onto the scanner glass.
Minimum size: No minimum size
Maximum size: 216 x 300 mm (8.5 x 11.8 in)
NOTE: Not all the length of the scanner glass is in the active imaging area, so make
sure to position your originals as indicated by the reference mark on the edge of the
scanner glass.
Place the original face down on the scanner glass, as indicated by the reference mark.
For landscape pages, place the pages face down with the top of the page pointing toward
the back of the scanner.
Chapter 1
12 Use the scanner