Hitachi L47S601 - Manual (Page 36)

36
Video
Select VIDEO to adjust picture settings and improve
picture quality. You can independently customize each of
the Video Inputs to your preference to increase viewing
performance and pleasure depending upon the video
program being viewed. If RESET is selected, only the
selected input will reset to initial conditions.
Picture Mode
Use this function to choose from automatic picture
settings to optimize your TV’s performance.
1. Use the CURSOR buttons ̇ or ̈ to highlight and
select PICTURE MODE settings (Day-Normal,
2. Then press the SELECT button to set the mode and
return to the Video menu or press EXIT to quit menu.
3. There are 3 Picture Modes available for the customer
Day (Dynamic) , Day (Normal) and Night mode.
Day (Dynamic) is the original factory preset mode , this
can be changed by adjusting any video setting to your
desire conditions. Day ( Normal ) can be used as a
second video setting for daytime viewing. Night is set
to watch programing during nigthtime.
1. Use the CURSOR PAD ̆ or ̄ to highlight the function to be adjusted.
2. Press the SELECT button or the CURSOR PAD ̈ to select the function settings.
3. Press the CURSOR PAD ̇ or ̈ to adjust the function.
4. Press MENU to return to main menu.
5. Press EXIT to quit menu.
Contrast
Use this function to change the contrast between black
and white levels in the picture.
Brightness
Use this function to adjust overall picture brightness.
Color
Use this function to adjust the level of color in the picture.
Tint
Use this function to adjust flesh tones so they appear natural.
Sharpness
Use this function to adjust the amount of fine detail in the picture.
Back Light
Day-Dynamic or Night).
Contrast 100%
Next/Prev Change SEL Return
Video
Black Enhancement
Color Temperature
Back Light
Sharpness
Tint
Color
Brightness
Contrast
Picture Mode Day (Dynamic)
100%
50%
62%
50%
igh
High
Picture Mode Day (Dynamic)
Cable
Next/Prev Select SEL Return
Move SEL Select
O
n
-S
cr
ee
n
D
is
p
la
y
Setup
Timers
Channel Manager
Locks
Audio
Video
Move SEL Select
Power Swivel
OR
Use this function to change the back light of the LCD panel, this will increase or decrease the brightness of the LCD panel but
not the brightness of the video signal.
Black Enhancement
Color Temperature
Back Light
Sharpness
Tint
Color
Brightness
Contrast
Picture Mode Day (Dynamic)
100%
50%
62%
50%
High
High
Video Cable
Move SEL Select
OR
100%