HP LE1911I - Manual (Page 24)

3. Adjust the monitor's height so that it is parallel to your eye height for a comfortable viewing position.
CAUTION: To prevent damage to the monitor, be sure not to lower it onto objects in the tray at
the base of the stand.
If an optional speaker bar is installed, exercise caution when moving the display head to the lower
end of the height-adjustment range. Contact with the stand could result in scratched paint or other
cosmetic damage to either the stand or the speaker bar.
Figure 3-20 Adjusting the Height
Turning on the Monitor
1. Press the power button on the computer to turn it on.
2. Press the power button on the front of the monitor to turn it on.
CAUTION: Burn-in image damage may occur on monitors that display the same static image on
screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you
should always activate a screen saver application or turn off the monitor when it is not in use for a
prolonged period of time. Image retention is a condition that may occur on all LCD screens. Monitors
with a “burned-in image” are not covered under the HP warranty.
* A prolonged period of time is 12 consecutive hours of non-use.
NOTE: On some models, if pressing the monitor power button has no effect, the Power Button Lockout
feature may be enabled. To disable the feature, press and hold the monitor power button for 10 seconds.
16 Chapter 3 Setting Up the Monitor ENWW