Document Outline

• cFP-2200/2210/2220 Operating Instructions and Specifications
  • Figure 1. cFP-22xx, Front and Bottom Views
• What You Need to Install the cFP-22xx
• Mounting the Compact FieldPoint Backplane
  • Figure 2. cFP-22xx Installed on cFP-BP-4 Mounted Upright
  • Figure 3. cFP-22xx Installed on cFP-BP-x, Bottom View with Dimensions
  • Figure 4. cFP-22xx Installed on cFP-BP-4, Front View with Dimensions
  • Figure 5. cFP-BP-8, Back View with Dimensions
  • Figure 6. cFP-BP-4, Back View with Dimensions
  • Mounting the Backplane on a DIN Rail
    • Figure 7. Installing the DIN Rail Clip on the cFP-BP-4
    • Figure 8. One Edge of DIN Rail Inserted in Clip
  • Mounting the Backplane on a Panel
    • Figure 9. Installing the Horizontal Panel-Mount Kit on the cFP-BP-4
    • Figure 10. cFP-BP-4 with Horizontal Panel Mount Kit Installed, Front View with Dimensions
    • Figure 11. cFP-BP-8 with Horizontal Panel-Mount Kit Installed, Front View with Dimensions
    • Figure 12. Installing the Vertical Panel-Mount Kit on the cFP-BP-4
    • Figure 13. cFP-BP-4 with Vertical Panel-Mount Kit Installed, Front View with Dimensions
    • Figure 14. cFP-BP-8 with Vertical Panel-Mount Kit Installed, Front View with Dimensions
  • Mounting the Backplane in a Standard 19 in. Rack
    • Figure 15. Dimensions of Rack-Mount Kit
    • Figure 16. Installing the Rack-Mount Bracket on the cFP-BP-4
    • Figure 17. Installing the Rack-Mount Bracket on the cFP-BP-8
    • Figure 18. Installing an 8 in. DIN Rail in the Rack-Mount Kit
• Installing the cFP-22xx on the Backplane
  • Figure 19. Installing the Controller on the Backplane
• Installing I/O Modules on the Backplane
  • Figure 20. Installing an I/O Module on the Backplane
• Installing Connector Blocks on the Backplane
  • Figure 21. Installing a Connector Block on the Backplane
• Connecting the cFP-22xx to a Network
  • Using Ethernet Port 2 to Connect the cFP-2220 to Other FieldPoint Systems on the Network
• Wiring Power to the cFP-22xx
  • Figure 22. Wrapping the Power Wires around the Ferrite
  • Figure 23. Closed Ferrite
  • Figure 24. Ferrite Installed with Tie Wrap
• Powering On the cFP-22xx
• Connecting Serial Devices to the cFP-22xx
  • COM 1
    • Figure 25. Controller Serial Port
    • Table 1. DB-9 Pin Descriptions
  • COM 2 (cFP-2210 and cFP-2220 Only)
  • COM 3 (cFP-2220 Only)
  • COM 4 (cFP-2220 Only)
    • Figure 26. 10-Position Modular Jack Pin Locations
    • Table 2. 10-Position Modular Jack Pin Descriptions
    • Figure 27. Wiring for an RS-485 Network Controlled by the cFP-2220
• External Digital Inputs and Outputs (cFP 2220 Only)
  • Figure 28. Wiring the cFP-2220 External Input and Output Terminals
• Connecting USB Mass-Storage Devices to the cFP-2220
• Using the Internal Real-Time Clock
• Configuring DIP Switches
  • Figure 29. DIP Switches
  • IP RESET Switch
  • SAFE MODE Switch
  • NO APP Switch
  • CONS OUT Switch
  • USER2 and USER1 Switches
• Using the Reset Button
• Understanding LED Indications
  • Figure 30. LEDs
  • STATUS LED
    • Table 3. Status LED Indications
  • POWER LED
  • User-Configurable LEDs
• Removable CompactFlash (cFP-2220 Only)
• File Transfer Capability
• Remote Front Panels
• Resetting the Network Configuration of the cFP-22xx
• Troubleshooting
  • Runaway Startup Application
  • Other Indications of Trouble with the Controller
    • Reformatting the Internal Memory
• Specifications
  • Network
  • Memory
  • Serial Ports
  • USB Port (cFP-2220 Only)
  • Power Requirements
  • Physical Characteristics
  • Safety Voltages
  • Safety Standards
  • Electromagnetic Compatibility
  • CE Compliance
  • Environmental Management
  • Environmental
  • Shock and Vibration
  • Special Conditions for Marine Applications
  • Cabling
    • Table 4. Ethernet Cable Wiring Connections
    • Figure 31. Ethernet Connector Pinout
• Where to Go for Support