National Instruments Fieldpoint CFP-2220 User Manual
Page 16
Advertising
cFP-2200/2210/2220
16
ni.com
Figure 21. Installing a Connector Block on the Backplane
4.
Using a number 2 Phillips screwdriver with a shank of at least 64 mm
(2.5 in.) length, tighten the captive screws to 1.1 N · m (10 lb · in.) of
torque.
5.
Repeat this procedure to install additional connector blocks on the
backplane.
Advertising
This manual is related to the following products: