Gateway 901 Series - Manual (Page 23)

17
Connect digital
(S/PDIF) audio
with 1/8" stereo to
1/8" stereo plug
for digital output or
use 1/8" stereo to
RCA plug for
analog output
Connect rear left
and right analog
speakers with 1/8"
stereo to RCA
plug Y-cables
Connect front left and
right analog speakers
with 1/8" stereo to
RCA plug Y-cables
Connect center/
subwoofer speakers
with 1/8" stereo to
RCA plug Y-cables
Connect digital
(S/PDIF) audio with
Toslink digital cable
Connect rear left and right
analog speakers with 1/8"
stereo to RCA plug Y-cables
Connect front left and
right analog speakers
with 1/8" stereo to
RCA plug Y-cables
Connect center/
subwoofer speakers
with 1/8" stereo to
RCA plug Y-cables
Connect digital
(S/PDIF) audio with
Toslink digital cable
If you purchased a sound
system with your Family
Media Center, use the
setup poster and other
documentation that was
included with the sound
system to set it up.
If you have an existing
stereo or home theater, you
can connect your Media
Center to an existing sound
system. Use:
• 1/8” stereo to RCA plug
Y-cables to connect the
Family Media Center to an
analog sound system.
• 1/8” stereo to 1/8” stereo
plug to connect the Family
Media Center to digital
audio inputs (S/PDIF).
• Toslink digital cable to
connect your Family Media
Center to digital audio
inputs (S/PDIF).
Tip:
The audio system setup varies, depending on your sound system audio inputs. See your sound system’s user
guide for more information about connecting audio inputs.
Connecting an audio system
1/8” stereo to 1/8” stereo plug Toslink digital cable 1/8” stereo to RCA plug Y-cables
Gateway FMC-901 Media Center Gateway FMC-901X Media Center