Gateway Projector 210 - Manual (Page 35)

32 www.gateway.com
To create MP3 files:
1
To have Musicmatch automatically list the album, artist, and track names of your CD,
then use that information for naming and storing your MP3 files, connect to the
Internet before inserting your CD.
2
Insert a music CD into your CD or DVD drive.
3
If an Audio CD dialog box opens, click Play Audio CD using MUSICMATCH Jukebox , then
click OK . The Gateway JUKEBOX by musicmatch window opens.
- OR -
If a dialog box does not open, click Start , All Programs , MUSICMATCH , then click
MUSICMATCH Jukebox . The Gateway JUKEBOX by musicmatch window opens.
4
If the CD is playing, click the stop button.
5
In the MUSIC CENTER area, under COPY , click Rip From CD . The Musicmatch recorder
opens.
6
Click to clear the check box for any track you do not want to record.
7
Click the start button.
8
When a message appears that tells you the CD drive needs to be configured, click
OK . After the drive is configured, Musicmatch records the tracks to your hard drive
as MP3 files. A progress bar appears next to each track as it is recorded.
9
Disconnect your player. For more information, see “Disconnecting your player” on
page 27 .
To copy files from Musicmatch to your player:
1
Connect your player to your computer. For more information, see “Connecting your
player” on page 24 .
2
Open Musicmatch on your computer.
3
In the MUSIC CENTER area, under COPY , click Send to Portable . The musicmatch
PORTABLE DEVICE MANAGER dialog box opens.
Important Some music CDs have copy protection software. You
cannot copy tracks from these CDs.