Motorola D210 - Manual (Page 18)

16
English
message. " ANS NO REC" makes the answering machine answer
calls but it won't let callers leave a message.
"A" appears on the base display if you set to "
ANS NO REC".
In standby mode:
1. Press to access the main menu.
2. Press or to select " TAM" and press .
3. Press or to select " TAM SETTINGS" and press .
4. Press or to select " TAM MODE" and press .
5. Press or to select " ANS WITH REC" or "ANS NO REC" and press
.
Remote operation
When your answering machine is off:
If your answering machine is switched off and you are out and
about, you can ring your phone from another phone to switch
it on. You can then listen to any messages that have been
stored.
1. Call your phone from any external Touchtone™ phone or
mobile phone.
2. After 15 rings your answering machine will take the call.
3. Press .
4. Enter your 4-digit security code.
The pre-set remote PIN code is 0000.
If you enter the PIN code incorrectly you will hear "Enter
security code".
You are then given two more attempts to enter the correct
PIN code before the line is disconnected.
5. The remote operation menu will begin to play to you. The
remote operation functions are shown in the table on
page 16. To stop play at any time and hear the menu
options again, press .
When your answering machine is on:
If you left your answering machine switched on, you can ring
your phone from another phone and enter your remote
security code to listen to your messages.
1. Call your phone from any external Touchtone™ phone or
mobile phone.
2. When you hear your OGM, press .
3. Enter your 4-digit PIN code.
The pre-set remote PIN code is 0000.
If you enter the PIN code incorrectly you will hear "Enter
security code".
You are then given two more attempts to enter the correct PIN
code before the line is disconnected.
4. The remote operation menu will begin to play to you.
To stop play at any time and hear the menu options again,
press .
5. You can now control your phone remotely by pressing any
of the option buttons announced.
If no button is pressed for 15 seconds after the announcement,
the line will be disconnected.
Remote operation table
Button Function
Play main menu options
Allegro_CID TAD.book Page 16 Tuesday, January 15, 2008 4:30 PM