MITSUBISHI ELECTRIC HS-HD1100U - Manual (Page 55)

53
JOG/CHANNEL
Changes channels when tape is stopped.
Adjusts tracking and picture vibration.
SHUTTLE ring
Fast forwards a tape or fast forward searches by turning
right. Rewinds a tape or reverse searches by turning left.
IEEE 1394 INPUT
Selects an integrated HDTV, an IEEE 1394-equipped
HDTV receiver or a D-VHS VCR connected to the VCR.
PLAY
Plays a tape.
Resumes normal playback from special effects.
STOP
Stops a tape.
PAUSE/% % % % %START TIME
Pauses a tape when recording.
Freezes a frame when playing a tape.
Sets the start time in OTR
2 recording.
REC/˙ ˙ ˙ ˙ ˙REC LENGTH
Records to the end of the tape by pressing once.
Sets the recording time for OTR recording by pressing
repeatedly.
POWER D-VHS EJECT
FF REW
JOG/CHANNEL SHUTTLE
REC LENGTH START TIME
OTR2
STOP PLAY REC PAUSE
IEEE 1394
INPUT
VIDEO IN 2 L/MONO-AUDIO IN 2 -R
SP/EP
cassette slot
front panel display
remote control
sensor
video input 2 jack
audio input 2 jacks
Location of Controls
Front Panel
POWER
Turns the VCR On or Off.
If you have programmed your VCR to record, turn off your
VCR.
EJECT
Ejects a tape.
D-VHS
Press to choose between recording in digital broadcast in
D-VHS format or in VHS format. This button lights up
during D-VHS recording/playing.
SP/EP
Changes the recording speed (SP is standard play; EP is
extended play).
video input ˙ ˙ ˙ ˙ ˙ jack
Connect source here, such as a VCR or camcorder, to
record or dub video.
audio input ˙ ˙ ˙ ˙ ˙ jacks
Connect source here, such as a VCR or camcorder, to
record or dub audio.
cassette slot
Insert the video cassette tape here.
front panel display
See the next page.
remote control sensor
Receives signals from the remote control.
Do not block it.