Multitech 1777.8/7-10 G3 - Manual (Page 4)

Caution
Multitec
4
1 General
The Multitec pump has been developed in accordance with
state-of-the-art technology; it is manufactured with utmost care
and subject to continuous quality control.
These operating instructions are intended to facilitate operation
of the pump and help in commissioning and maintenance.
The manual also contains important recommendations for
reliable, proper and efficient operation.
These operating instructions do not take into account local
regulations; the operator must ensure that such regulations are
strictly observed by all, including the personnel called in for
installation.
Multitec pumps must not be operated beyond the limit values
specified in the technical documentation for the fluid handled,
capacity, speed, density, pressure, temperature and motor
rating. Make sure that operation is in accordance with the
instructions laid down in this manual or in the contract
documentation.
The name plate indicates the type series / size and the main
operating data; please quote this information in all
correspondence and particularly when ordering spare parts.
If you need any additional information or instructions exceeding
the scope of this manual or in case of damage please contact
KSB’s after-sales service.
2 Safety
These operating instructions contain fundamental information
which must be complied with during installation, operation and
maintenance. Therefore this operating manual must be read
and understood both by the installing personnel and the
responsible trained personnel / operators prior to installation
and commissioning, and it must always be kept close to the
location of operation of the machine / unit for easy access.
Not only must the general safety instructions laid down in this
chapter on ”Safety” be complied with, but also the safety
instructions outlined under specific headings, plus:
- the general safety rules for working materials and protective
devices,
- the applicable organizational guidelines for the
commissioning of working materials and tools
(work guidelines R233-1 to R233 - 10 and decree No. 93-41
dd. 11/1/93, or country-specific guidelines).
2.1 Marking of instructions in the manual
The safety instructions contained in this manual whose
non-observance might cause hazards to persons are specially
marked with the general hazard sign, namely:
(safety sign as per ISO 7000 - 0434)
The electrical danger warning sign is
(safety sign as per IEC 417 - 5036).
The word
is used to introduce safety instructions whose non-observance
may lead to damage to the equipment and its functions.
Instructions attached directly to the machine, e.g.
- arrow indicating the direction of rotation
- markings for auxiliary connections
must always be complied with and be kept in a perfectly legible
condition at all times. Non-compliance with these safety
instructions will lead to forfeiture of manufacturer’s warranties.
2.2 Personnel qualification and training
All personnel involved in the operation, maintenance,
inspection and installation of the unit must be fully qualified to
carry out the work involved.
Personnel responsibilities, competence and supervision must
be clearly defined by the operator. If the personnel in question is
not already in possession of the requisite know-how,
appropriate training and instruction must be provided. If
required, the operator may commission the manufacturer /
supplier to take care of such training. In addition, the operator is
responsible for ensuring that the contents of the operating
instructions are fully understood by the responsible personnel.
2.3 Non-compliance with safety instructions
Non-compliance with safety instructions can jeopardize the
safety of personnel, the environment and the machine / unit
itself. Non-compliance with these safety instructions will also
lead to forfeiture of any and all rights to claims for damages.
In particular, non-compliance can, for example, result in:
- failure of important machine/system functions,
- failure of prescribed maintenance and servicing practices,
- hazard to persons by electrical, mechanical, thermal and
chemical effects,
- hazard to the environment due to leakage of hazardous
substances.
2.4 Safety awareness
It is imperative to comply with the safety instructions contained
in this manual, the relevant national health and safety
regulations and the operator’s own internal work, operation and
safety regulations.