Motorola CAJUN P880 - Manual (Page 40)

2 - 6 Cajun P880 Routing Switch Installation Guide
2
Figure 13 illustrates an example setup command session.
Figure 13. Layer 2 Setup Command Display
Connect to the system with an out-of-band connection using the 10/
100BASE-T port on the supervisor module.
Welcome to Switch Setup. The brief series of questions that
follows will help you to configure this switch. After completing
this process, you will be able to manage the switch using:
- the switch-based HTTP server
- the Element Management System.
Text in [] is the default answer for each questions. To accept
the default, press ENTER.
Would you like to change the super user password [Yes]? Y
Old Password: xxxx
New Password: xxxx
Re-type New Password: xxxx
What do you want the switch manager's console
Ethernet IP Address to be [192.168.39.40]?
What is the subnet mask for your network's
IP address [255.255.255.0]?
What is the IP address of the default gateway <-------
for this network segment [192.168.39.240]? <-------
You can now connect to the switch using the front-panel
out-of-band 10BASE-T connection. This allows you to log in
using either the embedded web agent or the EMS.
See the Installation and Operation Guide for instructions
on establishing additional IP network connections.