Integra DPS-10.5 - Manual (Page 30)

30
Connecting —Continued
This section shows how to connect the DPS-10.5’s video
outputs to an AV receiver’s video inputs.
Component video offers the best picture quality, so if
your AV receiver supports it, use a commercially avail-
able component video cable to connect the DPS-10.5’s
COMPONENT VIDEO OUT to a component video
input on your AV receiver. If your AV receiver supports
progressive scanning, you must use a component video
connection to take advantage of it.
If you don’t have component video, S-Video offers better
picture quality than composite video, so if your AV
receiver supports it, use the supplied S-Video cable to
connect the DPS-10.5’s S VIDEO VIDEO OUT to an
S-Video input on your AV receiver. Failing that, use the
supplied composite video cable to connect the
DPS-10.5’s VIDEO VIDEO OUT to a composite video
input on your AV receiver.
F. Using Component Video
Notes:
• The COMPONENT VIDEO OUT supports interlaced
video.
• HD COMPONENT VIDEO OUT supports progres-
sive video.
G. Using S-Video
H. Using Composite Video
Connecting an AV Receiver’s video
Inputs
Y
P B
P R
Y P B P R
VIDEO IN
VIDEO OUT
COMPONENT
Signal flow
AV receiver
S VIDEO
S VIDEO IN
VIDEO OUT
Signal flow
AV receiver
VIDEO
VIDEO OUT
VIDEO IN
Signal flow
AV receiver